Memjet Evo Module for Ducati Scrambler 400 800 1100

$259.00
In stock
1 available
SKU
JPMJ001-23

Memjet Evo – Performance Tuning At It's Simplest

Memjet Evo Module
includes
Memjet Evo Module
Wiring harness
Fitting instructions

Part No. JPMJ001-23

Model compatibility

Ducati Scrambler SIXTY2 2017 - current
Ducati Scrambler CAFE RACER 2017 - current
Ducati Scrambler CLASSIC 2015 - current
Ducati Scrambler DESERT SLED 2017 - current
Ducati Scrambler FULL THROTTLE 2015 - current
Ducati Scrambler ICON 2015 - current
Ducati Scrambler ITALIAN INDEPENDENT 2016
Ducati Scrambler URBAN ENDURO 2015

If you're looking for the simplest and most inexpensive way to tune your bike, then meet Jetprime Memjet Evo, the plug-and-play power module from Italy's no.1 performance tuning specialist.

Jetprime Memjet Evo requires no prior tuning experience, so you can easily fit it yourself, and remove it just as easily should you need to.

Memjet Evo is available for a huge range of fuel-injected bikes, and is ideal if you want a crisper, more responsive ride, or if you have an aftermarket exhaust and air filter fitted.

How Does It Work?

Memjet Evo connects to the bike's air tempurature sensor and works by allowing you to adjust the sensor's output using the control dial on the module. The MemJet Evo sends a colder/denser air value to the ECU, which responds by calling up more aggressive on-board mapping. The further you turn the dial, the more aggressive the mapping.

The dial reads from 0-10, where 0 represents no adjustment of the stock output (handy if your bike is in for testing). A setting of around 5 is generally best for most unmodifed bikes, greater than 5 for modified bikes, but a quick 5-10km test ride, gradually increasing the setting as you go, is usually all it takes work out which setting you like the most.

A higher setting is not necessarily better. You'll know when you've found the optimum setting because engine response across the entire rev range will have improved, and any jerkiness and / or blank spots should have all but disappeared.

  • Plug and play
  • No expensive remapping or dyno tuning required
  • Improved performance across the entire rev range
  • Waterproof

Looking for more control over engine mapping?

Then take a look at the Jetprime Programmable Power Module also available from our store. Like Memjet Evo, the Jetprime Module is easy to fit, but comes with software that gives you control over ignnition timing intervals.

Also available

Fed up with your engine cutting out, stalling, and jerkiness, especially in the low rev range? The check out Oxymett from Jetprime. Oxymett is a lambda probe emulator and has been developed for a wide range of Ducati, Aprila, Moto Guzzi, MV Agusta and BMW boxer models.

More Information
Barcode JP MJ 001
Brand Jetprime
Write Your Own Review
You're reviewing:Memjet Evo Module for Ducati Scrambler 400 800 1100
click here